Education is the Key!!!

This is a simple concept, yet time and time again I see this simple concept ignored and overlooked, EDUCATE.  I see this in precasters not educating customers and plumbers and pumpers not educating homeowners.  There is one thing that we do know as producers, there is a problem.  In previous blogs I have explained the nature of the Thiobicillus bacteria and how it attacks concrete.  I have also explained how precasters are helping the problem, but these are just words.  We have to be the teachers in our own mind and spread the word.  Explain to your customers that we understand we have a cancer in our industry, but we feel this cancer is curable.  It just takes time.  We need to evaluate mixes and this takes time.  The average tank failure is 7-10 years, YEARS, not hours.  If you explain to your customers that you know you have a problem, but you and your organizations are doing something to solve the problem, your customers have no reason to be upset with you.  Explain to them that mixes are being evaluated.  Tests are being done and results are coming in, but definitive answers have not been found.  The person who is in the dark and knows nothing until the problem is staring them in the eyes is the scared person.  That is the person who comes looking for answers and point fingers.  Don’t waste your time with useless guarantees and promises.  Bring the problem out to the open and don’t be afraid to admit you have a problem.  Society was built on exposing problems and fixing them.  Don’t leave your people in the dark!

Similarly, educate your homeowners.  Explain to them that there is a problem in this industry.  It is very unique and we do not have many answers yet.  Again we do not what is going on, but we need years to evaluate its effectiveness.  One of the primary questions I get asked on site in this problem, is how long will my tank last when I notice corrosion?  My answer to that is that it is very tough to estimate.  There is no definitive gauge or timeline on this problem, but the last thing you want to do is say your tank is ok don’t worry, or your tank is junk buy a new one.  A very simple answer would be it is hard to say, your tank’s structural integrity is definitely jeopardized, let’s monitor the situation and see how aggressive the attack is.  It is very easy to jot down some notes, take some pictures on what you have seen and record them for further evaluation.  On your next pumping cycle , service call, or sooner stop by.   I know we are all busy people, but monitoring and educating is the key to solving this problem.  The last thing you want to do is put your name on a guaranteed timeline.  Evaluate and Educate.  Another simple question is how did this happen?  This is usually where I put the ball in their court.  Ask them simple questions, what kind of cleaners do you use? Have you been taking prescription medications?  How many people are living in the home? Do you have any information regarding the groundwater and surrounding ground conditions? Any relevant information?  People tend to feel better if they are part of the solution and you would be surprised how many answers you can get from homeowners.  Again don’t ignore this problem.  It will not go away.  Instead bring it out in the open and EDUCATE!

Microbially Induced Corrosion in Septic Tanks pt 1

Microbially Induced Corrosion or MIC has been a problem with the concrete industry for years; however, it's impact on the precast industry has really been brought to the forefront recently with the discovery of rapid corrosion in septic tanks.  Septic tanks that normally have a service life 30-50 years are failing in a matter of years.  There are many aspects of this problem from how does the MIC happen to quality of concrete to actual relevance in an already struggling infrastructure.  Although it is my intent to cover most of these issues in most parts I would first like to start with an introduction.
MIC is a form of corrosion that is very dependant on bacteria.  Naturally occuring bacteria in septic tanks exrete hydrogen sulfide gas (rotten egg smell in sewerage).  Now this gas naturally stays dormant in septic tanks, until a form of turbulence is introduced.  When the turbulence is introduced the gas is released and floats in the air space of the tank.  Another occuring bacteria the thiobacillus bacteria converts the hyrogen sulfide gas into hydrosulfuric acid which eats concrete.  So looking at this from the outside you say ok eliminate the sulfur production or the thiobacillus bacteria and everything should be ok.  However it is those two aspects that make this problem one of the hardest to figure out.  Where does all the extra sulfur come from? Medications? Foods? Cleaners? Fertilizers?  How do we kill the thiobacillus bacteria?  There are modern additives that can be put in concrete to kill the bacteria, however I have not had the chance or heard from a first person perspective how effective the additive is.  Another approach is to realize that the thiobacillus bacteria cannot strive on surfaces with pH's greater than 9.  Fortunately or unfortunately, concrete is very basic pH 12-14.  It is the progression of the wastwater becoming more and more acidic that allows the thiobacillus to grow more prevalent on the concrete surface.  So as you can see, this problem just from the beginning is really complex.  In future blogs I plan on touching on topics such as quality concrete, coatings, additives in concrete, impact on infrastructure, the future of MIC, and other topics so stay tuned.   I leave you with a few pics to see how bad this problem is.  Thanks...Aaron